Functions
LAN-TAPI
LAN-TAPI Functions
LAN-TAPI
The LAN-TAPI from Auerswald provides the TAPI 2.1 interface over the Ethernet port on the
PBX.
A Microsoft server then distributes the functionality throughout the network (third party network
connection) onto the separate Microsoft computers so that telephony software, e.g., Estos
ProCall or other TAPI applications can use the TAPI functions. The PBX is addressed by the
server over the Ethernet interface. When a user wants to dial from the client PC, the command
is forwarded to the server. The server signals this to the PBX which then establishes the
connection.
LAN-TAPI Functions
LAN-TAPI supports the following functions:
• Display of the called MSN (multi-company operation)
• Call forwarding (CFU, CFB, CFNR)
• Call deflection (forwarding before call acceptance)
• Transfer
• Conference call
• Splitting
• Monitoring (status display of the extension)
• Pickup
Note: The possible functions are dependent on the end devices/applications
used.
Configuring Subscribers for LAN-TAPI
All subscribers that should be controlled over a PC must be configured for LAN-TAPI.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
250
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020