Functions - Auerswald COMpact 3000 analog Operating Manual

This section describes how to set up and operate the functions on your PBX. You will find out
what the functions do, how to operate each function and how to allocate authorisation for using
a function, when necessary.
In most cases, operation of the system can be carried out in two different ways:
• Operation using an internal telephone
• Operation using the configuration manager
Topics
– Exchange Line Authorization (page 195)
– Exchange Line Transfer (page 197)
– Call Waiting (page 202)
– Do-not-disturb (page 203)
– Call Forwarding (page 205)
– Baby Call (page 215)
– Busy on Busy (page 218)
– Call Through (page 219)
– Boss/Secretary Function (page 224)
– CLIP Texts (page 225)
– Call Deblocker (Outgoing) – Release Codes (page 227)
– Call Deblocker (Incoming) – VIP Numbers (page 230)
– Targeted Exchange Line Access (page 234)
– Targeted VoIP Access Point (page 235)
– InterCom Announcement/Handsfree (page 237)
– Configuration Switchover (page 240)
– Short-code Authorization (page 249)
– LAN-TAPI (page 250)
– LCR (page 256)
– Network Printer (page 267)
– Network Memory (page 269)
– Call Parking (page 272)
– Multi-path Call Forwarding (page 277)
– Pickup (page 280)
– Private (Personalized) Exchange Line Access (page 284)
– Room Monitoring (page 287)
– Telephone Number Display (CLIP) (page 292)
– Number Presentation (page 295)
– Soft Call (page 297)
– Call Restrictor (outgoing) – Restricted Numbers (page 298)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020

Functions

Functions
193