Configuring The Conversion Of Incoming Voip Telephone Numbers - Auerswald COMpact 3000 analog Operating Manual

Settings
VoIP

Configuring the Conversion of Incoming VoIP Telephone Numbers

country code with leading + sign: Your own external telephone number that
is to be transmitted to the receiver is transmitted to the VoIP provider along
with the entire country prefix and in the mobile phone telephone book format
(e.g., +49).
country code without leading zeroes: Your own external telephone number
that is to be transmitted to the receiver is transmitted to the VoIP provider with
the shortened country code (without the international prefix (digit), e.g., 49).
without country code: Your own external telephone number that is to be
transmitted to the receiver is transmitted to the VoIP provider without the
country prefix.
7. Under Display text for number suppression, select one of the following options:
no display text: No display text for enabled telephone number suppression is
transmitted from the VoIP provider to the receiver.
anonymous/anon.: The display text "anonymous/anon." is transmitted from
the VoIP provider to the receiver when telephone number suppression is
enabled.
8. Select or clear the By provider ("Privacy: User" Set) check box.
The PBX sets the flag "Privacy: User" in the SIP header. The VoIP provider
transmits no telephone number to the receiver.
The VoIP provider transmits the telephone number obtained from the PBX to
the receiver.
Note: Alternativly, if required by the VoIP provider, you can select the check
box On provider side (Remote-Party-Id with "privacy=full").
Further steps:
– Save your settings before you leave the page.
Configuring the Conversion of Incoming VoIP Telephone Numbers
In order for telephone numbers for incoming VoIP calls listed in the call data list to be used for
callbacks, they usually need to be converted. The following rules are used for this:
• Delete @ and the characters to the right of it: Deletes the @ character and the
characters to the right of the @. Example: The number 4953069200700@24515623478.de
becomes 4953069200700 after this rule is applied.
434
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020