Auerswald COMpact 3000 analog Operating Manual page 508

Settings
PBX Data
Entering PBX Name and Description
Note: The PBX name is displayed in the login window.
The entry can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Server configuration > Access and PBX data.
Note: The country is also configured when the PBX is activated during the
initial configuration.
2. Enter a name in the PBX name entry field under PBX. The following entries are
possible:
Up to 16 digits
Digits and characters
3. Enter the required information in the PBX description entry field under PBX. The
following entries are possible:
Up to 120 digits
Digits and characters
Further steps:
– Save your settings before you leave the page.
508
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020