Auerswald COMpact 3000 analog Operating Manual page 216

Functions
Baby Call
Switching Baby Call On/Off
Up to 20 digits
Exchange line access number + external phone number
Short-code numbers
Internal number of the individual telephone
Internal number of the line group
Further steps:
– Save your settings before you leave the page.
Switching the Baby Call Function On/Off via the Internal Telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
1. Pick up the receiver of the telephone in question.
2. Dial one of the following character strings:
*53#: Enables baby call with the existing destination number. (No other action
is required.)
#53#: Disables the baby call. (No other action is required.)
*53*: Enables the baby call.
3. Enter the destination number. The following entries are possible:
** and internal telephone number of the individual telephone
use a direct exchange line access, omit the **.)
** and internal telephone number of the line group
direct exchange line access, omit the **.)
External phone number
the exchange line access number before dialling the telephone number.)
** and short code number
omit the **.)
4. Dial #.
216
(If you do not use a direct exchange line access, dial
(If you do not use a direct exchange line access,
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
(If you do not
(If you do not use a