Auerswald COMpact 3000 analog Operating Manual page 265

If the 1st dial attempt (main provider) via the analogue connection on the
COMpact 3000 analogue is unsuccessful, the dial attempt is automatically
ended. There is no fallback to another provider.
9. Click .
10. Click under Tariff.
11. In the Price per minute entry fields, enter the corresponding values for the main
provider and the fallback providers. The following entries are possible:
Price in the 00.0000 format: Specifies the price per minute from 0.0000 to
99.9999.
Digits and the separator
Note:
The PBX uses Price per minute for internal calculations and display
purposes during calls that are initiated by an LCR subscriber and perhaps a
Call Through user and routed via the corresponding provider.
The Price per minute refers to the currency entered in the PBX
(FUNCTIONS > Time and call allowance accounts > Settings under
Currency).
12. In the Price per connection entry fields, enter the corresponding values for the main
provider and the fallback providers if the provider for each established connection
invoices charges. The following entries are possible:
Price in the 00.0000 format: Specifies the price per minute from 0.0000 to
99.9999.
Digits and the separator
Note:
The Price per connection is added to the price of the call – calculated from
the Price per minute and connection time.
The Price per connection refers to the currency entered in the PBX
(FUNCTIONS > Time and call allowance accounts > Settings under
Currency).
13. In the first Meter pulse interval (1st pulse / second pulse) entry fields, enter how
many seconds the provider assigns the first meter pulse after the connection has
been established (after CONNECT). The following entries are possible:
1 to 6000
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
,
,
sec.: Specifies the first meter pulse from 1 to 6000 seconds.
Functions
Creating Tariff Information for Networks
LCR
265