Enabling Auerswald Remote Access (Ara) For The Pbx - Auerswald COMpact 3000 analog Operating Manual

Service and Maintenance
Remote Configuration and Alternative Connection Options

Enabling Auerswald Remote Access (ARA) for the PBX

Enabling Auerswald Remote Access (ARA) for the PBX
Requirements:
– Computer with existing connection to the Internet (DSL)
– PBX with existing connection to the Internet (DSL)
– DTMF-capable telephone or DTMF dialler
– Access data for registration at protected Auerswald services
– Knowledge of the serial number of the PBX
– Enabled dealer access over the Internet in the PBX
– Set external PIN
– Configured remote switching number for remote configuration (PPP) and remote
programming
– Knowledge of user name and password for the configuration manager
1. Start a browser (e.g. Mozilla Firefox).
2. In the browser's address field, enter
access.
3. Enter the required data in the User name/Customer number and Password/PIN
input fields, and click on Log in.
The user interface of the ARA server (ARA = Auerswald Remote Access) opens.
4. Register the PBX if this has not been done yet.
a) Click
b) In the Serial number entry field, enter the serial number of the PBX.
c) Make further entries for the data set and click on Save.
5. Call the remote switching number for remote programming.
The PBX automatically accepts the call. You will hear the external confirmation tone
(1 second.
6. Dial with DTMF
You will hear the external confirmation tone (1 second).
7. Select the previously registered PBX on the user interface of the ARA server, at the
beginning of the line, and click on
8. Log in to the configuration manager.
9. Make the desired changes.
534
.
##8 External PIN *91#.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
http://remote-access.auerswald.de/remote-
behind Connect.