Lcr; Lcr Sequence; Configuring Lcr - Auerswald COMpact 3000 analog Operating Manual

Hide thumbs Also See for COMpact 3000 analog:

Table of Contents

LCR

LCR (Least Cost Routing) is a function of the PBX that enables the subscriber to automatically

make calls using the most cost-effective telephone service provider. To set this up, the function

must be configured and the current tariff structure of the telephone service providers to be used

saved in the tariff tables on the PBX.

LCR Sequence

The automatic LCR runs as follows:

• A user on the LCR subscriber or a Call Through user (when LCR is enabled for Call Through

calls) dials an external phone number.

• The PBX controls whether the area code is entered in the tariff groups.

• If the provider area code is found, the PBX initiates the dial attempt automatically via the

selected providers.

Automatic LCR is not carried out for the entered emergency numbers

(CONFIGURATION > Emergency and baby/senior call > Emergency

If a call is initiated via a targeted exchange line access, automatic LCR is not

carried out.

Requirements:

– Support of call-by-call by the network provider

– External analogue port (only COMpact 3000 analogue) or external S

COMpact 3000 ISDN or COMpact ISDN module available as an option)

Configure LCR as follows:

1. Enable LCR on the external port.

2. Select the subscribers on which automatic LCR should be carried out.

COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020

Compact 3000 isdn Compact 3000 voip