** and the internal telephone number of the line group
direct exchange line access, omit the **.)
External telephone number
dial the exchange line access number before dialling the telephone number.)
** and the short code number
omit the **.)
6. Dial #.
Further steps:
– To check whether multi-path call forwarding has been enabled or disabled, dial ##97, the
telephone number of the call distribution group and the character string #*#481#. If multi-path
call forwarding is disabled, you will hear the busy tone.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Switching Multi-path Call Forwarding On/Off
(If you do not use direct exchange line access,
(If you do not use direct exchange line access,
Functions
Multi-path Call Forwarding
(If you do not use
279