Call Waiting; Switching Call Waiting On/Off - Auerswald COMpact 3000 analog Operating Manual

Functions

Call Waiting

Switching Call Waiting On/Off

Call Waiting
If you are already in a call, the call waiting function notifies you using the call waiting tone when
another communication partner is calling.
Switching Call Waiting On/Off
Switching this on/off can be done as follows:
• Separately for subscribers
• Via the configuration manager
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
User settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call waiting check box.
Enables call waiting.
Disables call waiting.
Further steps:
– Save your settings before you leave the page.
– When using an ISDN telephone: If necessary, also enable call waiting on the telephone itself
(optional, see manual for the telephone).
202
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020