Auerswald COMpact 3000 analog Operating Manual page 210

Functions
Call Forwarding
Switching Call Forwarding for External Numbers On/Off
– Subscriber authorisation for configuring features on the exchange line
1. Pick up the receiver.
2. Dial ##96.
3. Enter the telephone number to be rerouted. The following entries are possible:
External phone numbers
exchange access)
Note:
Telephone numbers to be rerouted are telephone numbers dialled by external
callers (prefix + PBX base number + DDI or prefix + MSN).
If the PBX only has one external connection and one telephone number has
been selected for number presentation, you can simplify call forwarding
configuration. If you configure call forwarding for external numbers for this
telephone number on the telephone in question, the entire character string
can be dialled without having to manually enter the telephone number to be
forwarded, that means e.g. ##96#*61#.
4. Dial one of the following character strings:
#*61#: Enables call forwarding on no reply for external numbers with an
existing destination number. (No other action is required.)
##61#: Disables call forwarding on no reply for external numbers. (No other
action is required.)
#*61*: Enables call forwarding on no reply for external numbers.
5. Enter the destination number. The following entries are possible:
External phone number
the exchange line access number before dialling the telephone number.)
** and short code number
omit the **.)
6. Dial #.
210
(independent of the configuration of the direct
(If you do not use a direct exchange line access, dial
(If you do not use a direct exchange line access,
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020