Configuring The Ringer Frequency - Auerswald COMpact 3000 analog Operating Manual

Settings
Ringer Rhythms

Configuring the Ringer Frequency

1 x long: 1 long tone (1 second), 4 second pause, ...
3 x short: 3 double tones, approx. 1 second pause, ...
1st special tone: Uninterrupted pulsing
2nd special tone: Continually repeating double tones (3 double tones in
5 seconds)
3rd special tone: 1 double tone, approx. 4 second pause, ...
4th special tone: 2 short tones, approx. 4 second pause, ...
5th special tone: 2 long tones, approx. 3 second pause, ...
6th special tone: 1 short and 1 long tone, approx. 4 second pause, ...
Further steps:
– Save your settings before you leave the page.
Configuring the Ringer Frequency
The ringer frequency indicates the ringer voltage frequency signals the PBX calls to the internal
analogue subscribers.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page CONFIGURATION > Internal phone numbers > Analogue
subscribers.
2. In the Rhythm frequency list field, select one of the following options:
25 Hz
50 Hz
Further steps:
– Save your settings before you leave the page.
490
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020