Configuring Call Assignments - Auerswald COMpact 3000 analog Operating Manual

Functions
Call Through

Configuring Call Assignments

Further steps:
– Save your settings before you leave the page.
Configuring Call Assignments
Configuring the call assignments also specifies the external phone number over which the Call
Through user uses the Call Through function and how many Call Through calls can be made
simultaneously.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an option)
0
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > Call Through.
2. In the Call Through telephone numbers list field under Call assignment, select the
external telephone number that must be dialled by the Call Through user in order to
call the PBX for Call Through.
Note: Call Through telephone numbers are not available for call distribution
and cannot be rerouted.
3. Enter a value in the Max. number of Call Through calls entry field under Call
assignment. The following entries are possible:
0 to 2: A maximum of 0 to 2 Call Through calls can be made simultaneously.
Further steps:
– Save your settings before you leave the page.
222
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020