Auerswald COMpact 3000 analog Operating Manual page 335

4. Only available when Manual has been selected: Enter the remaining time in minutes
and seconds in the Remaining time entry field under Add to credit. The following
entries are possible:
Digits (minutes)
5. Only available when ... by or ... to has been selected: Enter the credited time in
minutes in the Credited time entry field under Add to credit. The following entries
are possible:
0 to 999
Note: The add credit procedure starts at 0:00 a.m. at the first available point
of time (e.g., Monday, 0:00 a.m. for adding to the credit weekly) of the add
credit rhythm selected.
6. Click Credit now.
Further steps:
– Save your settings before you leave the page.
Configuring Credit for a Time Account via an Internal Telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– Knowledge of the sub-admin or admin PIN
1. Pick up the receiver.
2. Dial ##8.
3. Enter the sub-admin or admin PIN.
4. Dial *74.
5. Enter the internal telephone number. The following entries are possible:
** and internal telephone number of the individual telephone
use a direct exchange line access, omit the **.)
6. Dial *.
7. Enter the number of minutes. The following entries are possible:
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
: Digits (seconds)
Functions
Time and Call Allowance Account
Configuring Credit for a Time Account
(If you do not
335