Auerswald COMpact 3000 analog Operating Manual page 212

Functions
Call Forwarding
Configuring the Use of the Feature via the PBX or the Network Provider
Note: However, the time necessary to set up the user telephone remains the
same. A longer configuration time (time until the acknowledgment) must be
taken into account.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External analogue port (only COMpact 3000 analogue), external S
COMpact 3000 ISDN or COMpact ISDN module available as an option) or external VoIP
channel
– Configuration manager, opened with sufficient authorisation
– For a feature via the PBX: At least two call channels
1. Open the page CONFIGURATION > External numbers.
2. In the list field at the top, select the connection in question.
A page opens for configuring the connection in question.
3. Open one of the following pages:
• Analogue connection > Name and functions
• ISDN connection > Name and functions
4. In the Feature via list field, select one of the following options:
Network provider: Enables the use of the feature via the network provider.
PBX (2nd call channel): Enables the use of the feature via the PBX.
Note: When a call is forwarded via the network provider, it is not possible to
display the call charges on the PBX display.
Further steps:
– Save your settings before you leave the page.
212
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
port (only
0