Auerswald COMpact 3000 analog Operating Manual page 69

Note: Prevent interferences. Avoid laying long lengths of parallel lines,
especially next to mains. Twist the pairs.
2. Attach the wires to the two central terminal clamps at the internal U
3. Connect:
• ISDN wall socket: Connect the IAE or UAE8 sockets to the terminal clamps at the
internal U
Connect – if necessary – the U
• U /S adapter: Connect the two screw terminals on the back of the U
P0 0
adapter to the terminal clamps of the internal U
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
port.
P0
P0
Connecting the Cable and the Wall Sockets to the Internal U
/S adapter.
0
port.
P0
Installation and Commissioning
ISDN End Devices
P0
port.
P0
/S
P0 0
Port
69