Auerswald COMpact 3000 analog Operating Manual page 533

Possible Connection Options for Configuring the PBX and the Connected ISDN System Telephones
Configuration of the PBX via an Internal S
Important: This function is only possible with the COMpact S
COMpact ISDN module available as an option.
The PBX can only be configured over an indirect internal or external ISDN connection on a
device that is not only connected to an internal S
controller or Auerswald USB device). The PBX must be configured for this purpose accordingly.
A dial-up connection must also have been previously configured on the PC.
Remote Configuration on the PBX via the External S
Important: This function is only possible on the COMpact 3000 ISDN or the
COMpact ISDN module available as an option.
The PBX can only be configured remotely over an indirect external ISDN connection on a
device that is not only connected to the external S
controller or Auerswald USB device). The PBX must be configured for this purpose accordingly.
A dial-up connection must also have been previously configured on the PC.
Note: During a remote configuration (PPP), the page loading of the configu-
ration manager may take some minutes.
Configuring an ISDN System Telephone via the PBX (Internal)
An ISDN system telephone can be configured via an indirect connection over the PBX. The
configuration software COMfortel Set for the ISDN system telephone must be previously
installed.
Configuring an ISDN System Telephone Remotely via the External S
Important: This function is only possible on the COMpact 3000 ISDN the
COMpact ISDN module available as an option.
An ISDN system telephone can be configured remotely over the PBX and one device that is
connected to both the external S
USB device). The PBX must be configured for this purpose accordingly. The configuration
software for the ISDN system telephone must have been previously installed.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Remote Configuration and Alternative Connection Options
Port (PPP Internal)
0
port on the PBX but also to a PC (ISDN PC
0
port on the PBX but also to a PC (ISDN PC
0
port on the PBX and a PC (ISDN PC controller or Auerswald
0
Service and Maintenance
module or
0
Port (PPP External)
0
Port on the PBX
0
533