Creating Analogue Subscribers - Auerswald COMpact 3000 analog Operating Manual

Settings
Internal Telephone Numbers

Creating Analogue Subscribers

Note: Due to the permanent allocation of these internal telephone numbers,
the following telephone numbers can no longer be allocated: 70, 80, 87, 875-
879
The following telephone numbers can also be freely allocated from the number range:
• Exchange line access numbers (account numbers) for VoIP (8000 in the factory settings for
the VoIP account named VoIP)
• Internal telephone numbers for subscribers (21 to 24 in the factory settings for analogue
subscribers)
• Internal telephone numbers for line groups (8700 in the factory settings for the configured
subscribers 21 to 23)
• Internal basis telephone number for call parking
• Internal CAPI dial-in number
• Short-code numbers
• Emergency numbers (110 and 112 in the factory settings of the German PBX models)
Note:
Double allocation of a number is not possible.
Using telephone numbers with few digits (two or three-digit numbers) inevi-
tably restricts the possible supply of telephone numbers with more digits. For
example, if the telephone number 12 is assigned, the telephone numbers
120-129 and 1200-1299 are no longer available.
The default exchange line access number on the PBX is "0" in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone number plan.
The telephone number plan can be opened in the configuration manager by
selecting Telephone number plan in the list field next to
. To close the overview, click Close. The overview can be printed by
clicking Print.
Creating Analogue Subscribers
The analogue subscribers are on the end devices for which internal telephone numbers are
allocated and that are connected to analogue ports. The telephone numbers are used to
access the end devices via the PBX.
358
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
and then clicking