Switching Call Pickup On/Off - Auerswald COMpact 3000 analog Operating Manual

Functions
Pickup

Switching Call Pickup On/Off

2. In the list field at the top, select the subscriber in question by his name or number.
3. In the Pickup list field, select one of the following options:
Enables authorisation for pickup.
Disables authorisation for pickup.
Further steps:
– Save your settings before you leave the page.
Switching Call Pickup On/Off
Call pickup is appropriate for answering machines, fax machines and modems. For example,
if an answering machine is faster than the subscriber and picks up the call, the subscriber can
take the call from the answering machine if call pickup has been enabled for this. The
answering machine receives then the busy tone.
Switching this on/off can be done as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Authorizations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. In the Call Pickup list field, select one of the following options:
Enables call pickup.
Disables call pickup.
Further steps:
– Save your settings before you leave the page.
282
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020