Auerswald COMpact 3000 analog Operating Manual page 275

The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Call Parking.
2. Enter an internal telephone number in the Internal base telephone number entry
field. The following entries are possible:
2 to 3 digits in the range of
Note:
Double allocation of a number is not possible.
The telephone numbers 70, 80, 87, 701-706, 801-806, 875-879 and 8750-
8799 cannot be freely allocated. They are required for internal PBX use.
Using telephone numbers with few digits (two or three-digit numbers) inevi-
tably restricts the possible supply of telephone numbers requiring more digits.
For example, if the telephone number 12 is assigned, the telephone numbers
120-129 and 1200-1299 are no longer available.
The default exchange line access number on the PBX is "0" in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone number plan.
3. Enter the corresponding name in the Name entry field. The following entries are
possible:
Up to 15 digits
Digits and characters
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Configuring the Internal Base Telephone Number for the Parking Zone
10 to 999
Functions
Call Parking
275