Creating Call Through Users - Auerswald COMpact 3000 analog Operating Manual

Creating Call Through Users

The telephone numbers on the mobile phone (call through user) which are used to carry out
the Call Through function must be entered in the telephone book. Call Through authorisation
must be enabled for the telephone book entries in question. In addition, it can be configured
whether the telephone number dialled by the Call Through user should be checked to see if it
is a call restrictor or call deblocker number.
The creation can be carried out as follows:
• Via the configuration manager
Note: Only the telephone numbers on an ISDN connection can be used as
external telephone numbers for the Call Through function. When making a
call using VoIP, there is no guarantee that the displayed telephone number is
the actual telephone number. The Call Through user can therefore not be
detected with certainty.
Requirements:
– Configuration manager, opened with sufficient authorisation
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an option)
0
– Telephone number for the Call Through user entered in the telephone book
– Expert view (click
1. Open the page USER DATA > Telephone book > Entries.
2. Select or clear the Call through check box for the telephone book entry in question.
Enables Call Through authorisation.
Disables Call Through authorisation.
3. Select or clear the Call restrictor/deblocker check box for the telephone book entry
in question.
Enables verification for call restrictor/deblocker numbers.
Disables verification for call restrictor/deblocker numbers.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Functions
Call Through
Creating Call Through Users
223