Creating Emergency Numbers - Auerswald COMpact 3000 analog Operating Manual

Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– External analogue port (only COMpact 3000 analogue) or external S
COMpact 3000 ISDN or COMpact ISDN module available as an option) or external VoIP
channel (only COMpact 3000 VoIP)
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Emergency and baby/senior call > Settings.
2. Select or clear the Emergency call has priority check box.
Enables emergency call priority switch.
Disables emergency call priority switch.
Note: The emergency call priority switch is enabled for the entire PBX.
Further steps:
– Save your settings before you leave the page.

Creating Emergency Numbers

Up to ten external telephone numbers can be entered as emergency numbers.
Important: You must enter these telephone numbers along with their area
code (even if they are in your own local network). Exceptions to this are the
official emergency telephone numbers, e.g. 999 in the United Kingdom and
911 in the United States.
Note:
The emergency numbers 110 and 112 are assigned in the factory settings
(official emergency telephone numbers in Germany).
Entering emergency telephone numbers without an area code reduces the
size of the internal call number plan. For example, if the emergency
telephone numbers are 110 and 112 this means the internal telephone
numbers 110 and 112 and also 1100 to 1109 and 1120 to 1129 are no longer
available.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Settings
Emergency Call
Creating Emergency Numbers
port (only
0
469