Auerswald COMpact 3000 analog Operating Manual page 488

Settings
Ringer Rhythms
Configuring a Ringer Rhythm for External Calls via the Point-to-Multipoint Connection
Note:
Signaling is carried out by analogue devices as described.
ISDN devices generate their own call tone/ringtone. For more information,
refer to the description of your ISDN end device.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an option)
0
or/and VoIP account in the connection type point-to-multipoint connection
– Configuration manager, opened with sufficient authorisation
– Configured prefixes (country prefix and local area code)
1. Open the page CONFIGURATION > External numbers.
2. In the list field at the top, select the connection in question.
A page opens for configuring the connection in question.
3. Open one of the following pages:
• ISDN connection > Telephone numbers
• VoIP connection > Telephone numbers
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
4. Select one of the following options in the Ringtone list field.
1 x long: 1 long tone (1 second), 4 second pause, ...
3 x short: 3 double tones, approx. 1 second pause, ...
1st special tone: Uninterrupted pulsing
2nd special tone: Continually repeating double tones (3 double tones in
5 seconds)
3rd special tone: 1 double tone, approx. 4 second pause, ...
4th special tone: 2 short tones, approx. 4 second pause, ...
5th special tone: 2 long tones, approx. 3 second pause, ...
6th special tone: 1 short and 1 long tone, approx. 4 second pause, ...
488
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020