Switching Partial Telephone Number Privacy For Private Calls On/Off - Auerswald COMpact 3000 analog Operating Manual

Telephone Book and Lists
Call Data

Switching Partial Telephone Number Privacy for Private Calls On/Off

1. Open the page FUNCTIONS > Call data > Memory use.
2. Select or clear the check box for the type of call (Recording outgoing calls,
Recording incoming calls, Recording wake-up calls).
Enables recording.
Disables recording. (No other action is required.)
3. If necessary, select or clear the corresponding check box for the sub-selection:
Enables recording.
Disables recording.
Further steps:
– Save your settings before you leave the page.
Switching Partial Telephone Number Privacy for Private Calls On/Off
Due to reasons of privacy protection, the transparency of external telephone numbers during
outgoing private calls can be dispensed with. When this is done, the last three digits of the
telephone number dialled is displayed as asterisks (*). The remaining data from each call will
continue to be recorded.
Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > Call data > Memory use.
2. Select or clear the Recording outgoing calls check box.
Enables the recording of outgoing calls.
Disables the recording of outgoing calls. (No other action is required.)
3. Select or clear the Private calls with partial telephone number privacy check box.
Enables partial telephone number privacy for private calls.
Disables partial telephone number privacy for private calls.
146
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020