Auerswald COMpact 3000 analog Operating Manual page 28

Important Information
Product Details
• a/b-Audioboxes
Internal S Port (only provided at the optionally available modules COMpact S
0
and COMpact ISDN module)
An internal S port is suitable for connecting one of the following terminal devices:
0
• COMfortel 1200/1400/1600/2600 system telephones
Important:
To support the COMfortel 1600 and COMfortel 2600 system telephones, the
PBX needs a firmware version 4.0I and higher.
To support the COMfortel 1200 and COMfortel 1400 system telephones, the
PBX needs a firmware version 4.0N and higher.
• COMfortel 1100/1500/2500/2500 AB system telephones (as of firmware version 4.0B)
• COMfortel DECT 900 Bases for COMfortel DECT 900/900C system telephones
• ISDN telephones in compliance with the Euro ISDN Standard (DSS1)
• ISDN PC controller in compliance with the Euro ISDN Standard (DSS1)
Important: The power consumption of the end devices on an S
total a maximum of 2.5 W.
Internal U Port (only provided at the optionally available COMpact ISDN module)
P0
An internal U port is suitable for connecting one of the following terminal devices:
P0
• COMfortel 1200/1400/1600/2600 system telephones
Important:
To support the COMfortel 1600 and COMfortel 2600 system telephones, the
PBX needs a firmware version 4.0I and higher.
To support the COMfortel 1200 and COMfortel 1400 system telephones, the
PBX needs a firmware version 4.0N and higher.
• COMfortel 1100/1500/2500/2500 AB system telephones (as of firmware version 4.0B)
All other devices can only be connected to the U
port with two Western sockets by converting 2-wire to 4-wire. It is suitable for connecting the
following terminal devices:
• COMfortel DECT 900 Bases for COMfortel DECT 900/900C system telephones
28
port via a U
P0
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
0
port may
0
/S adapter. It provides a S
P0 0
module
0