Switching The Fax Box On/Off - Auerswald COMpact 3000 analog Operating Manual

Switching the Fax Box On/Off

Switching this on/off can be done as follows:
• Separately for external telephone numbers
• Separately for configurations
• Via the configuration manager
Requirements:
– An SD card inserted in the SD card slot or a USB memory stick inserted in the USB port
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Call distribution > Create call distribution.
All of the separate external telephone numbers entered and the corresponding group
phone numbers (call distribution groups) are displayed horizontally across the table.
Note: Click
telephone numbers. Click
2. In the Fax function list field, select the fax box you want in column of the corre-
sponding telephone number.
Note:
When using a COMpact 3000 analogue, also configure the fax switch in the
first Fax function list field.
COMpact 3000 ISDN and VoIP: If you would like to designate the fax box for
querying specific subscribers, first select the subscriber (
the corresponding telephone number. Selecting the fax box disables call
distribution for the subscriber.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
to scroll horizontally across the table to display other
to scroll back again.
Voice Mailboxes and Fax Boxes
Fax Box
Switching the Fax Box On/Off
) in the column of
175