Auerswald COMpact 3000 analog Operating Manual page 525

– Configuration manager, opened with sufficient authorisation
– A configuration file (*.cfg) saved on a data storage medium (PC)
– For the settings Apply network settings and Apply PBX data: Expert view (click
1. Open the page SERVICE > Data backup > Save and read out configuration data.
Note: The saving procedure is also provided during the quick configuration
using the configuration wizard.
2. Click Browse (this text is dependent on the browser used) under Store configu-
ration data in the PBX.
A file selection dialogue opens.
3. Select the file (*.cfg) you want and click Open (this text is dependent on the operating
system used).
The path and the file name are displayed in the Configuration file field.
4. Select or clear the check box Apply network settings under Store configuration
data in the PBX.
The network settings are applied.
The network settings are not applied.
5. Select or clear the check box Apply PBX data under Store configuration data in
the PBX.
The PBX data are applied.
The PBX data are not applied.
6. Click Store in PBX.
A confirm action dialogue opens.
7. Click Next.
The configuration data are saved in the PBX.
Saving the Configuration Data from the Data Storage Medium in the PBX via an Internal
Telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– The configuration file (auconfig.cfg) saved on a USB memory stick or SD card saved
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Backing Up and Recovering Configuration Data
Saving Configuration Data from the PC/Data Storage Medium in the PBX
Service and Maintenance
)
525