Auerswald COMpact 3000 analog Operating Manual page 546

Service and Maintenance
Remote Configuration and Alternative Connection Options
Configuring the External PIN
Further steps:
– Save your settings before you leave the page.
Changing a PIN Using an Internal Telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– Configured external PIN
– Knowledge of the external PIN
1. Pick up the receiver.
2. Dial *99*.
3. Enter the existing external PIN.
4. Dial *.
5. Enter the new external PIN. The following entries are possible:
Exactly 6 digits
Digits
Note:
The PIN may not begin with a zero.
All of the PINs in the PBX are unique. This means that it is not possible to
allocate the same PIN twice.
Do not use dates of birth or dates as PINs. This makes it easy for an attacker
to find out the correct PIN. PINs which are easy to guess, such as 111111 or
123456, should also be avoided.
6. Dial *.
7. Reenter the new external PIN.
8. Dial #.
Note: If, at this point, you hear a busy tone instead of a confirmation tone, the
new PIN may already be in use in the PBX and no change takes place. Re-
attempt with another digit sequence.
546
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020