Importing Voip Providers - Auerswald COMpact 3000 analog Operating Manual

Settings
VoIP

Importing VoIP Providers

The default providers are restored.
Further steps:
– If necessary, change the standard settings according to the data provided by your VoIP
provider.
Importing VoIP Providers
The VoIP provider data can be imported from a file (*.ft). The corresponding files containing
current access data for VoIP providers can be downloaded from the Internet.
The import can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Access data for the VoIP provider (*.ft) saved on a data storage medium (PC)
1. Open the page CONFIGURATION > Voice over IP (VoIP) > VoIP provider.
2. Click Browse (this text is dependent on the operating system used).
A file selection dialogue opens.
3. Select the file to be imported and click Open (this text is dependent on the browser
used).
4. Click Import.
The access data is saved in the PBX.
Note:
The data of the import file is added to the existing list of providers, without
verification whether a provider is already contained in the list (double entries).
If importing the data would cause the number of providers to exceed the
maximum number of 10 entries, the import is not carried out and an error
message is displayed.
Further steps:
414
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020