Auerswald COMpact 3000 analog Operating Manual page 327

The saving procedure can be carried out as follows:
• Via the configuration manager
Note: To enable specific wake-up announcements depending on the time of
day, you need to create switching times and assign the configured wake-up
announcements.
Saving the Wake-up Announcement from the PC into the PBX via the Configuration
Manager
It is possible save up to three WAVE files stored on the PC as wake-up announcements in the
PBX. When this is done, the wake-up announcements are automatically named (wake-up
announcement 1 with "good_morning.wav," wake-up announcement 2 with "good_day.wav,"
wake-up announcement 3 with "good_evening.wav").
The WAVE files must have the following properties:
• Format: 16 kHz, 16-bit mono
• Maximum length: approx. 20 seconds
• Size in memory: max. 680 KB
Note: On the German Auerswald Internet page, audio files can be converted
into the audio format required for the PBX (see
service). Files stored in the MP
*.mp3, *.wav or *.raw), for example, can be converted into the audio format
G.722 (*.wav) with the Audio Converter.
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Wake-up functions > File and volume.
2. In the File list field, select one of the following options:
Wake-up announcement 1: Selects wake-up announcement 1.
Wake-up announcement 2: Selects wake-up announcement 2.
Wake-up announcement 3: Selects wake-up announcement 3.
3. Click Browse (this text is dependent on the browser used) under Store in the PBX.
A file selection dialogue opens.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Recording, Saving and Listening to Wake-up Announcements
www.auerswald.de/
, wave and raw file formats (file extensions
3
Functions
Wake-up Functions
327