Configuring The Portal Page - Auerswald COMpact 3000 analog Operating Manual

Configuring the Portal Page

After logging into the configuration manager, the portal page is displayed. Each user (adminis-
trator, sub-administrator, user) can configure this page according to his needs.
Not only information windows but also windows, in which functions can be enabled or disabled,
can be displayed. A total of up to ten windows can be displayed on a portal page.
Note: The portal page can be opened at any time in the configuration
manager. To do this, click
configuration manager.
The configuration can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the portal page.
2. Click .
A list field is displayed.
3. Select a topic in the list field.
4. Click .
The topic is placed on the portal page as a window.
5. Repeat steps 3 and 4 to place additional windows on the portal page.
Note:
The windows can be moved in sequence on the portal page.
A window can be deleted from the portal page. To do this, click
right corner of the window.
Click to immediately end configuring the portal page. When this is done,
the last settings configured, but not yet saved are not saved.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Basic Knowledge Configuration Manager
next to the PBX name at the top left of the
Configuration Manager
Configuring the Portal Page
in the upper
89