Auerswald COMpact 3000 analog Operating Manual page 330

Functions
Wake-up Functions
Recording, Saving and Listening to Wake-up Announcements
0 to 100: The playback volume of wake-up announcement increases or
decreases, depending on the value entered.
Further steps:
– Save your settings before you leave the page.
Listening to a Wake-up Announcement via an Internal Telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– A configured sub-admin PIN
1. Pick up the receiver.
2. Dial ##8.
3. Enter the sub-admin PIN.
4. Dial one of the following character strings:
*5721#: Plays wake-up announcement number one back.
*5722#: Plays wake-up announcement number two back.
*5723#: Plays wake-up announcement number three back.
You will hear the wake-up announcement.
Note: Depending on the length of the announcement, it may take some time
for it to load. During this time, you will hear two short tones, around every 5
seconds.
Deleting a Wake-up Announcement (Restoring Default Wake-up Announcement) via an
Internal Telephone
If a recorded wake-up announcement is deleted, the default wake-up announcement is
automatically enabled.
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– A configured sub-admin PIN
330
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020