Auerswald COMpact 3000 analog Operating Manual page 541

The Connection routes dialogue opens with the devices connected via the
configured interface.
7. If necessary, double-click the PBX symbol to display all the connected system
telephones. Select the telephone whose configuration you would like to open and
click OK.
The PIN entry dialogue opens.
8. Select the desired authorisation level from the Authorization level list field.
9. Enter the associated PIN in the PIN entry field and click OK.
The configuration is loaded from the telephone. This may take a while.
10. Make the desired changes.
Once you have configured all the changes to your satisfaction, first save the configu-
ration as described in the following as a file on a storage medium (PC) and then in the
telephone.
11. Open the menu File > Save.
12. Click File.
A file location dialogue opens.
13. Select the directory in which you would like to save the file.
14. Enter a filename with the ending .cf2 and click Save (this text is dependent on the
operating system used).
15. Open the menu File > Save.
16. Click Telephone.
The Connection routes dialogue opens with the devices connected via the
configured interface.
17. Select the telephone on which you would like to save the configuration and click OK.
The PIN entry dialogue opens.
18. Enter the associated PIN in the PIN entry field and click OK.
The configuration is saved on the telephone. This may take a while.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Remote Configuration and Alternative Connection Options
Configuring ISDN System Telephones via the PBX (Internal)
Service and Maintenance
541