Recording And Configuring The Announcement For Music On Hold - Auerswald COMpact 3000 analog Operating Manual

Functions
Music on Hold and Announcement

Recording and Configuring the Announcement for Music on Hold

4. Dial *5532#.
Recording and Configuring the Announcement for Music on Hold
The recording can be made as follows:
• Using a character string on the internal telephone
The configuration can be made as follows:
• Via the configuration manager
Saving the Announcement for Music on Hold from the PC into the PBX via the Configu-
ration Manager
It is possible to save a WAVE file stored on the PC as a music on hold announcement in the
PBX. The file is automatically named "announce.wav".
The WAVE file must have the following properties:
• Format: 16 kHz, 16-bit mono
• Maximum length: approx. 1 minute
• Size in memory: max. 2 MB
Note: On the German Auerswald Internet page, audio files can be converted
into the audio format required for the PBX (see
service). Files stored in the MP
*.mp3, *.wav or *.raw), for example, can be converted into the audio format
G.722 (*.wav) with the Audio Converter.
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Music on hold/announcement > File and volume.
2. In the File list field, select the Announcement option.
3. Click Browse (this text is dependent on the browser used) under Store in the PBX.
A file selection dialogue opens.
314
, wave and raw file formats (file extensions
3
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
www.auerswald.de/