Auerswald COMpact 3000 analog Operating Manual page 554

Service and Maintenance
Factory Settings
Restore Factory Settings
If the "Power" LED lights up in green again, the restart is complete and the PBX is
ready for operation.
Note:
If the "Power" LED remains continuously lit in red, an error has occurred.
Please contact your dealer or the manufacturer directly.
If you release the "Default" button too early (while the "Power" LED is still
blinking slowly), the PBX restarts with the update image. In this state, the
"Messages" LED lights up in green, the "Line" LED blinks green and the
"Power" LED is off. Telephoning or configuration is no longer possible. In
order to resolve this state, you need to restart the PBX. Press the "Reset"
button briefly.
If you release the "Default" button too late (the "Power" LED is no longer
flashing), restart the PBX without making any changes.
Further steps:
– Create a new configuration.
554
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020