Auerswald COMpact 3000 analog Operating Manual page 58

Installation and Commissioning
Network Provider
Connecting the Ethernet Port with the Internet
COMpact 3000 VoIP: The following figure shows the position of the RJ-45 socket
„WAN" at the side of the casing, as well as the set up connection.
Further steps:
– Configure the necessary network settings on the router and/or on the PBX at the end of
commissioning.
Note: To connect the router to the network provider, please refer to the
documentation provided by the network provider, as well as to the documen-
tation of the router.
58
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020