Configuring Maximum Credit For Time Accounts; Configuring Credit For A Call Allowance Account - Auerswald COMpact 3000 analog Operating Manual

Functions
Time and Call Allowance Account

Configuring Maximum Credit for Time Accounts

0 to 998: Sets the time account from 0 to 998 minutes.
999: Sets the time account to unlimited.
8. Dial #.
Configuring Maximum Credit for Time Accounts
The maximum credit for time accounts shows how many minutes the credit in a time account,
e.g., after adding credit, may show at most.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open one of the following pages:
• COMpact 3000 analogue/VoIP: FUNCTIONS > Time accounts > Settings
• COMpact 3000 ISDN: FUNCTIONS > Time and call allowance accounts >
Settings
2. Enter a value in the Maximum credit for a time account entry field under credit. The
following entries are possible:
1 to 9999: Specifies the maximum credit for time accounts from 1 to 9999
minutes.
Further steps:
– Save your settings before you leave the page.

Configuring Credit for a Call Allowance Account

In order to carry out charge verification, credit can be added to the individual call allowance
accounts. As soon as the configured credit is used up, it is no longer possible to make external
calls on the corresponding telephone until the credit has been increased or reset.
336
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020