Configuring The External Pin - Auerswald COMpact 3000 analog Operating Manual

– Save your settings before you leave the page.

Configuring the External PIN

The external PIN is required for the following:
• Perform a configuration switchover manually via an external telephone
• Monitor a room via an external telephone
• A dial-up connection for initiating remote configuration on the PBX if the user name
"external" is used
The configuration can be made as follows:
• Via the configuration manager
• Using a character string on the internal telephone
Configuring an External PIN via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page SERVICE > Remote configuration.
2. Enter the external PIN in the External PIN entry field under Remote configuration
(PPP) and remote programming. The following entries are possible:
Exactly 6 digits
Digits
Note:
The PIN may not begin with a zero.
All of the PINs in the PBX are unique. This means that it is not possible to
allocate the same PIN twice.
Do not use dates of birth or dates as PINs. This makes it easy for an attacker
to find out the correct PIN. PINs which are easy to guess, such as 111111 or
123456, should also be avoided.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Remote Configuration and Alternative Connection Options
Service and Maintenance
Configuring the External PIN
545