Switching Automatic Memory Overwriting On/Off - Auerswald COMpact 3000 analog Operating Manual

Note:
The data for LCRNr (LCR number), Scr no. invoice (Int. subscriber
(invoice)), Billing (Billing factor), types of billing bus. (Business)/private
(Private) and Type of call are always displayed in the Info column of the call
data list.
All call data that has not been enabled for display in the call data list is
displayed in the Info column of the call data list.
3. Enter the desired text in the entry fields under New description. The following entries
are possible:
Digits and characters
Up to 16 digits
Further steps:
– Save your settings before you leave the page.

Switching Automatic Memory Overwriting On/Off

If the automatic overwriting of the memory is enabled, new calls are recorded in a full call data
memory by overwriting the oldest data.
Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > Call data > Memory use.
2. Select or clear the Overwrite the memory automatically check box under Memory
full.
Enables the automatic overwriting of the memory.
Disables the automatic overwriting of the memory.
Further steps:
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Telephone Book and Lists
Switching Automatic Memory Overwriting On/Off
Call Data
143