Auerswald COMpact 3000 analog Operating Manual page 85

An empty field normally indicates that a name or number is to be
entered. Click in the field in question and use the keyboard to enter a
number or desired text.
The following characters may not be used:
If increased security against Cross-Site Scripting (XSS) has been
enabled under CONFIGURATION > Server configuration > Network,
the following characters may also not be used:
In order to change an existing entry, double-click the entry to be
overwritten. The field then becomes blue and can either be overwritten
directly or the existing text can be deleted using the delete/backspace
key.
For functions that can be more than just switched on and off but only
have a few options to choose from, the field already contains a default
setting. To change this, click the opened list field to make a selection.
Left-click the field to open the list field.
For some functions, a small circular button (option button) is located
next to the setting options listed. The selected setting is indicated by a
dot inside the circle. The setting is changed by clicking an empty circle.
Selecting this setting option simultaneously deactivates any other
previous selection.
A square check box indicates a switching function. An empty check box
means "off" and "no"; a check mark on the other hand, means "on" and
"yes". The switchover is done by simply left-clicking the box.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
• " quotation marks
• ' inverted comma
• $ dollar sign
• % percent sign
• < pointy bracket - smaller than
• > pointy bracket - higher than
• \ backslash
• ^ caret
• [ ] square brackets
• { } curly brackets
• # pound sign
• & and sign
• + plus sign
• \ slash
Basic Knowledge Configuration Manager
Operating Instructions for the Configuration Manager
Configuration Manager
85