Copying A Telephone Book Selection Into Other Mobile Handsets - Auerswald COMpact 3000 analog Operating Manual

Settings
DECT System Telephones

Copying a Telephone Book Selection into Other Mobile Handsets

As soon as the data transfer has started, the PBX starts to distribute the
assigned telephone book entries to the corresponding handsets. If a handset
is currently not ready for the data transfer (switched off, impossible to reach
or in a call), the PBX will try the next handset after a few minutes until all data
has been distributed.
COMfortel DECT: The handset is not reachable during a data transfer
(duration 2 minutes max.) and there is "Copying from PBX" in the display.
COMfort DECT: During the data transfer (duration app. 3 minutes) you
should not phone on the concerning telephone. On the handset this is
displayed as "Transfer ... Please Wait".
If the same telephone numbers have to be transferred into the telephone
number book of several COMfortel DECT handsets, these telephone
numbers have to be selected for a single COMfortel DECT 900/900C handset
only. This handset is the source for the other telephones that should to
receive these telephone numbers (see CONFIGURATION > Internal
numbers > ISDN subscribers > DECT Settings).
Copying a Telephone Book Selection into Other Mobile Handsets
The telephone numbers selected for a DECT system telephone in the telephone book can be
copied into other mobile handsets.
Copying can be carried out as follows:
• Via the configuration manager
Requirements:
– Internal S port (only provided on the COMpact S
0
available as an option)
– Configuration manager, opened with sufficient authorisation
– Configured internal telephone numbers for the base station
– Assigned internal telephone numbers for the mobile handsets
– Telephone numbers selected in the telephone book for transmission for the source subscriber
458
• If more telephone numbers have been selected in the column Max.
entries /Free entries than available in the memory of the handset (e.
g. if telephone book have been entered manually after the read-out
of data), telephone numbers are transferred into the mobile part until
all the memory locations are filled. The telephone numbers with
lower short-code dial numbers are transferred first.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
module or COMpact ISDN module
0