Auerswald COMpact 3000 analog Operating Manual page 35

Internal Analogue Port
Connection (unit)
Type of dialling
Open-circuit voltage
Loop current
Range
Call voltage
Audible signals
Impedances a/b
Frequency range
Internal S Port
0
Connection (unit)
Connection type
Supply voltage
Feeder
End devices
Range
Terminators
Internal U Port
P0
Connection (unit)
Connection type
Supply voltage
Feeder
Range
External Analogue Port
Connection (unit)
Type of dialling
Impedances a/b
Reception amplification
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Terminal clamp (2-core), at basic unit or TAE socket
Pulse or tone dialling
Max. 40 VDC
Approx. 21 mA
2 x 50 Ohm, approx. 790 m at 0.6 mm diameter
Approx. 45 V , configurable: 25/50 Hz
eff
425 Hz +/-5 %, interval +/-10 %
Z 270 Ohm + 750 Ohm || 150 nF
Euro
50 to 7000 Hz (wideband sound quality)
Terminal clamp (4-core), optional RJ-45 socket
S basis access as Point-to-Multipoint connection, Euro
0
ISDN (DSS1)
40 V + 5 % / –15 %
Max. 2.5 W
Max. 2 ISDN end devices recommended (of which max. 2
end devices without separate power feed, e. g. different
ISDN telephones)
Bus setup: max. 150 m; Point-to-Point connection: max.
1000 m; European standards ENV41001 [DINV41001] and
EN28877 apply to IAE termination technology
Switchable; factory settings on
Terminal clamp (2-core)
U mit Euro ISDN Protocol (DSS1); 2 B channels, direct
P0
connection of a U telephone or the U
P0
40 V + 5 % / –15 %
Max. 2.5 W
screened cable: up to 600 m; unscreened cable: up to 1000
m
RJ-11 socket
DTMF
Configurable
Configurable
Important Information
Technical Data
/S adapter
P0 0
35