Stake Slope - Leica TS03 User Manual

3D-Road Check
Next step
7.13.6
Description
130
Description of fields
Field Öption
Offset Left,
Right or
Centre.
Chainage Display only
Offset Display only
Ht.Diff. Display only
Display only
ΔEast
Display only
ΔNorth
Either, press Meas to measure and record.
•
• Or, press ESC to return to the Setout/Check/Slope values screen.

Stake Slope

The subapp Stake Slope is used to stake out the catch point, which is the inter-
section point of a defined slope with the natural surface.
The slope is always defined as starting from a hinge point. If the parameter
offset right/left and height difference are not entered, the point at the defined
chainage on the horizontal alignment is the hinge point.
Description
Defined horizontal offset.
Current chainage from measured point.
Perpendicular offset to alignment.
Height difference between the measured
point and the defined height.
Calculated difference in Easting coordinate
between the measured point and the align-
ment element.
Calculated difference in Northing coordinate
between the measured point and the align-
ment element.
Apps