9.13.6
Description
Access
Applications
Subapplication Stake Slope
The subapplication Stake Slope is used to stake out the catch point, which is the
intersection point of a defined slope with the natural surface.
The slope is always defined as starting from a hinge point. If the parameter offset
right/left and height difference are not entered, the point at the defined chainage on
the horizontal alignment is the hinge point.
k
a
b
d
m
g
TSOX_056
Press STK-SLP from the Define Stake/Check/Slope values screen.
P1
a
j
b
c
c
d
e
l
e
f
P1
h
f
g
i
h
i
j
k
l
m
Measured point
Horizontal alignment
Defined offset
Defined height difference
Hinge point
Defined slope
Catch point
Natural surface
Δ Offset to catch point
Cut/fill to catch point
Offset to hinge point
Offset to alignment
Height difference to hinge point
Height difference to alignment
FlexLine, 191