Toyota Celica 2005 Repair Manual page 1391

1ZZ−FE:
2ZZ−GE:
Matchmarks
Valve Lifter
2005 CELICA (RM1131U)
ENGINE MECHANICAL −
(b) Turn the crankshaft 1 revolution (360°) and align the mark
as above (See procedure in step 2).
(c) Check only the valves indicated as shown. Measure the
valve clearance (See procedure in step (a)).
A10366
4. 1ZZ−FE:
ADJUST VALVE CLEARANCE
(a) Set the No. 1 cylinder to the TDC/compression (See pro-
cedure in step 2).
(b) Place matchmarks on the timing chain and camshaft tim-
ing sprockets.
(c) Remove the 2 bolts and chain tensioner.
A10411
(d) Remove the camshaft and timing sprocket assemblies
(See page EM−44).
(1)
(2)
(3)
(4)
HINT:
When holding the timing chain, disconnect the timing chain
from the camshaft timing sprocket.
A10412
(e) Tie the timing chain with a string as shown in the illustra-
tion.
NOTICE:
Be careful not to drop anything inside the timing
S
chain cover.
Do not allow the chain to come into contact with water
S
or dust.
(f) Remove the valve lifters.
A01053
1390
VALVE CLEARANCE
19 camshaft bearing cap bolts
9 camshaft bearing caps (No. 1 & No. 3)
Exhaust camshaft and timing sprocket assembly
Intake camshaft and timing sprocket assembly
EM−5