Switchport Mode Private-Vlan - Dell S4810 Reference Manual

Command INTERFACE VLAN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Usage The list of secondary VLANs can be:
Information
•
•
•
Related
private-vlan mode
Commands
or primary.

switchport mode private-vlan

switchport mode private-vlan
Set PVLAN mode of the selected port.
S4810
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode
private-vlan command.
Parameters
host
promiscuous
trunk
Private VLAN (PVLAN)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Specified in comma-delimited or hyphenated-range format.
Specified with this command even before they have been created.
Amended by specifying the new secondary VLAN to be added to the list.
— sets the mode of the selected VLAN to community, isolated,
Enter the keyword host to configure the selected port or
port channel as an isolated interface in a PVLAN.
Enter the keyword promiscuous to configure the selected
port or port channel as an promiscuous interface.
Enter the keyword trunk to configure the selected port or
port channel as a trunk port in a PVLAN.
— sets PVLAN mode of the selected port.
1321