Switchport Mode Private-Vlan - Dell C9000 Series Reference Manual

switchport mode private-vlan

Set PVLAN mode of the selected port.
C9000 Series
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode
private-vlan command.
Parameters
host
promiscuous
trunk
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Usage Information The assignment of the various PVLAN port types to port and port channel (LAG)
interfaces is shown in the following example.
Example
Dell#conf
Dell(conf)#interface TenGigabitEthernet 2/1
Enter the keyword host to configure the selected port or port
channel as an isolated interface in a PVLAN.
Enter the keyword promiscuous to configure the selected port
or port channel as a promiscuous interface.
Enter the keyword trunk to configure the selected port or port
channel as a trunk port in a PVLAN.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Private VLAN (PVLAN) 1783