Clear Ip Bgp Ipv6 Unicast Soft - Dell MXL 10GbE Reference Manual

command), BGP sends a route-refresh request to the neighbor and receives all of
the peer's updates.
Related clear ip bgp
Commands

clear ip bgp ipv6 unicast soft

Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform
BGP soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-
neighbor-addr | peer-group name} ipv6 unicast soft [in | out]
Parameters
*
as-number
ipv4-neighbor-
addr | ipv6-
neighbor-addr
peer-group
name
ipv6 unicast
soft
in
out
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Border Gateway Protocol IPv4 (BGPv4)
— activates inbound policies without resetting the BGP TCP session.
Clear and reapply an asterisk ( * ) for all BGP sessions.
Clear and reapply policies for all neighbors belonging to the
AS. The range is from 0 to 65535 (2 Byte), from 1 to
4294967295 (4 Byte), or from 0.1 to 0.65535.65535 (Dotted
format).
Clear and reapply policies for a neighbor.
Clear and reapply policies for all BGP routers in the specified
peer group.
Clear and reapply policies for all IPv6 unicast routes.
Reapply only inbound policies.
NOTE: If you enter soft, without an in or out option,
both inbound and outbound policies are reset.
Reapply only outbound policies.
NOTE: If you enter soft, without an in or out option,
both inbound and outbound policies are reset.
Introduced on the MXL 10/40GbE Switch IO Module.
399