Assign An Ip Address To A Vlan; Connecting The Chassis To The Network - Dell C Series Quick Start Manual

Step Task
Assign a switchport to a
1
VLAN.
Display all switchports
2
and the VLANs of which
they are members.

Assign an IP address to a VLAN

NOTE: You cannot assign an IP address to the default VLAN, which, by default, is
VLAN 1. To assign another VLAN ID to the default VLAN, use the default vlan-id
vlan-id command.
Task
Configure an IP address and mask on
the interface.

Connecting the Chassis to the Network

After you have completed the hardware installation and software configuration,
you can connect to your company network by following your company's cabling
requirements.
26
Installing the Software
Command Syntax
[tagged | untagged] interface INTERFACE VLAN
show vlan
Command Syntax
ip address ip-address
mask [secondary]
Command Mode
EXEC Privilege
Command Mode
INTERFACE