Ip Vlan-Flooding - Dell S4810 Reference Manual

ip vlan-flooding

Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command CONFIGURATION
Modes
Command
Version 9.3(0.0)
History
Default Disabled
Usage By default this command is disabled. There might be some ARP table entries which
Information are resolved through ARP packets which had Ethernet MAC SA different from MAC
information inside the ARP packet. This unicast data traffic flooding occurs only for
those packets which use these ARP entries.
Microsoft Network Load Balancing
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
platforms
1099